Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 40 (kliknij aby zobaczyć)
LOCATION OF APPLIANCE
This is a type X appliance which means it is freestanding and can be fitted with cabinets on one or both sides. This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom or shower room. It is essential that the appliance is positioned as stated below (see Fig. 1a)) i.e. shelves, wall cabinets and cooker hoods must be fitted a minimum of 787mm directly above the top of hotplate and 400mm above the hotplate when fitted in line with the outside of the appliance. If the units are intended to be fitted adjacent to the appliance but less than 400mm above the hotplate, then a minimum space of 100mm must be maintained between the sides of the unit and the appliance (see Fig.1b). Curtains must not be fitted immediately behind the appliance or within150mm of the sides of the hotplate. If fitted next to or between two base units a minimum space of 1mm must be left between each unit and the sides of the appliance. The levelling feet fitted to the appliance will achieve a nominal height to hotplate trims of 900mm - 2mm +20mm. If the appliance needs to be higher that 920mm, then an optional height adjustment kit is available which will raise the appliance to a nominal height of 945mm (wheels kit no. 359079800 G.C. No 074 498).
